Kyocera TASKalfa 250ci Operation Manual page 345

Error Message
Cannot duplex print
on this paper.
Cannot execute this
job.
Cannot offset this
paper.
Cannot print the
specified number of
copies.
Cannot staple at the
specified position.
Cannot staple this
paper.
Check the cover.
Check the document
processor.
Check the finisher.
Clean the slit glass.
Confidential
document is
detected.
Failed to specify Job
Accounting.
Failed to store job
retention data.
Checkpoints
Did you select a paper size/
media type that cannot be
duplex printed?
–
Did you select a paper size/
media type that cannot be
offset?
–
Have you selected a
position that cannot be
stapled?
Did you select a paper size/
type that cannot be stapled?
Is there any cover which is
open?
Is the document processor
open?
Is the top cover of the
document processor open?
Is the document finisher set
correctly?
–
–
–
–
Corrective Actions
Select the available paper type.
Press [Continue] to print without
using Duplex.
This job is canceled because it is
restricted by Job Accounting. Press
[End].
Select the available paper size/type.
Press [Continue] to print without
using Offset.
Only one copy is available due to
processing too many jobs in parallel.
Press [Continue] to continue printing.
Press [Cancel] to cancel the job.
Select a position that can be stapled.
Press [Continue] to print without
using Staple.
Select the available paper size/type.
Press [Continue] to print without
using Staple.
Close the cover indicated on the
touch panel.
Close the document processor.
Close the top cover of the document
processor.
Set the document finisher correctly.
For details, refer to the respective
Operation Guides.
Clean the slit glass using the cleaning
cloth supplied with the document
processor.
The machine detects the documents
guard pattern. The scanned
document is printed in blank and
sending of the document is canceled.
The job is canceled. Press [End].
The job is canceled. Press [End].
10-7
Troubleshooting
Reference
Page
3-12
—
3-14
—
—
—
—
10
—
10-28
—
9-3
8-81
—
—