Developer Refresh; Laser Scanner Cleaning; Mp Tray Cleaning - Kyocera TASKalfa 250ci Operation Manual

Developer Refresh

When the printing is too light or incomplete, even though there is enough toner, refresh the developer.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance], [
3
Press [Execute]. Developer Refresh begins.
NOTE:
Waiting time may be longer when the toner is refilled during developer refresh.
4
Press [OK] after Developer Refresh is complete.

Laser Scanner Cleaning

If white or color streaks appear on images, perform Laser Scanner Cleaning.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance], [
3
Press [Execute]. Laser Scanner Cleaning begins.
4
Press [OK] after Laser Scanner Cleaning is complete.

MP Tray Cleaning

If dirt appears on images when using the multi purpose tray
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance], [
3
Load two sheets of A4 or Letter paper in the multi purpose tray.
4
Press [Execute]. MP Tray Cleaning begins.
5
Press [OK] after MP Tray Cleaning is complete.
] and then [Next] of Developer Refresh.
] and then [Next] of Laser Scanner Cleaning.
, perform MP Tray Cleaning.
] and then [Next] of MP Tray Cleaning.
8-53
Default Setting (System Menu)
8