Kyocera TASKalfa 250ci Operation Manual page 258

Original Orientation
Set the original orientation defaults. The available default settings are shown below.
Item
Top Edge Top
Top Edge Left
Refer to page 4-9 for Original Orientation.
Use the procedure below to select the default orientation when originals are placed on the platen.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select [Top Edge Top] or [Top Edge Left] for the default.
4
Press [OK].
Continuous Scan
Set the continuous scan defaults. The available default settings are shown below.
Item
Off
On
Refer to page 4-9 for Original Orientation.
Use the procedure below to select the default settings for continuous scanning.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select [Off] or [On] for the default.
Use the procedure below to select the default quality setting for originals.
4
Press [OK].
Select the original's top edge at the top.
Select the original's top edge at the left.
], [Next] of Function Defaults and then [Change] of Original Orientation.
Continuous scan not performed
Continuous scan performed
], [Next] of Function Defaults and then [Change] of Continuous Scan.
8-16
Default Setting (System Menu)
Description
Description