Kyocera TASKalfa 250ci Operation Manual page 261

Use the procedure below to select the default file format.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default file format.
4
Press [OK].
File Separation
Select the default file separation setting. The available default settings are shown below.
Item
Off
Each Page
NOTE:
Refer to page 5-13 for file separation.
Use the procedure below to select the default file separation.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default for [Off] or [Each Page].
4
Press [OK].
Density
Set the default density. The available default settings are shown below.
Item
Manual (Normal 0)
Auto
NOTE:
You cannot specify the density if you have selected [Full Color], [Auto Color (Color/Gray)], or
[Grayscale] in Color Select.(Send/Store).
Use the procedure below to select the default density.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default density.
4
Press [OK].
], [Next] of Function Defaults and then [Change] of File Format.
No file separation performed (all the pages are compiled in one file).
Each scanned page is created into a separate file.
], [Next] of Function Defaults and then [Change] of File Separation.
Set to (Normal 0) in the Manual density.
Set to Auto density.
], [Next] of Function Defaults, [
8-19
Default Setting (System Menu)
Description
Description
] and then [Change] of Density.
8