Force-Starting The Communication - Kyocera TASKalfa 181 Operation Manual

Various Functions of this Fax

Force-Starting the Communication

You can force-start a communication that is waiting in memory, without having to wait for the
scheduled start time.
Notes
•
•
•
1 Open the cover plate to the left and press the Status
key.
2 Press the
press the Enter key.
3
Press the
TX [Immediate transmission] and press the
Enter key.
If there are no communications that are using the timer
currently in memory, an error message will appear and
then the message display will return to the Edit menu.
4
Press the
number that corresponds to the communication that
you want to force-start.
5 Press the Enter key. The corresponding operation will begin automatically.
3-14
A communication force-started through the following procedure will then begin before any other
communication.
You can also force-start a communication that is waiting for Automatic Redialing.
If you want to cancel the procedure part way through, press the Reset key. The operation panel
will return to the initial mode settings.
key or the key to select Edit and
key or the key to select Immediate
key or the key to select the document
Status
TX Result on LCD
RX Result on LCD
Edit
Edit:
Print
Immediate TX
Program/Change
Immediate TX:List
Doc # :003
:26585632
22:22 Send
P01