Modifying Or Deleting Subaddress Relay Boxes - Kyocera TASKalfa 181 Operation Manual

Modifying or Deleting Subaddress Relay Boxes

Perform the following procedure when you want to modify or delete final destinations or change
other information registered under any Subaddress Relay Box, as well as when you want to
completely delete one of those boxes.
Notes
•
•
1
Perform steps 1 – 3 of Registering New Subaddress Relay Boxes on page 5-24.
2 Press the
Relay Box you want to modify or delete.
3 Select whether you want to modify information that is registered in that box or to completely delete
the box, and then perform the corresponding procedure below.
> Modifying information in the box
(1) Press the Enter key.
(2) Enter the 4-digit Subaddress Communication
(3) Press the Enter key.
(4) Press the
(5) After you have completed the desired modification and the message display has returned to the
> Deleting the box
(1) Press the Stop/Clear key.
(2) Enter the 4-digit Subaddress Communication
4 Press the Enter key. The information for that box will be modified or the Subaddress Relay Box
completely deleted, as appropriate.
> If you want to continue modifying and/or deleting other Subaddress Relay Boxes, return to step 2.
> If you are finished modifying and/or deleting Subaddress Relay Boxes, press the Reset key. The
You CANNOT modify a registered Subaddress Communication password. If you want to
change a Subaddress Communication password, delete the corresponding Subaddress Relay
Box and then register it again with the desired password.
If you want to cancel the procedure part way through, press the Reset key. The operation panel
will return to the initial mode settings.
key or the
password that corresponds to that box.
key or the
you want to modify and then press the Enter key.
See Registering New Subaddress Relay Boxes
on page 5-24, for instructions in regard to each item.
same message as in step (4), press the
password that corresponds to that box.
operation panel will return to the initial mode settings.
key to select the Subaddress
key to select the item that
key to select End.
Other Features of this Fax
Program Subad Relay Box:
End
#01 3333
#02
Password:
Enter Your Password
Subaddress Relay Box:#01
End
Subaddress
Password
Password:
Enter Your Password
:3333
:3333
5-27