Kyocera TASKalfa 181 Operation Manual page 106

Other Features of this Fax
9
Press the Enter key.
If the fax number you entered has already been registered for this operation or too many numbers
were entered, an error message will appear in the message display. In this case, press the Enter
key and the message display will return to a display that allows you to enter the transmitting party's
fax number again.
10
Select whether or not you want to continue entering other transmitting fax numbers.
> If you DO want to enter more fax numbers, return to step 4.
> If you are finished entering fax numbers, proceed to step 11.
11 If you want to designate a time for the reception to
begin, press the Delayed TX key.
If the maximum allowable number of communications
that use the timer (max: 50) is reached, an error
message will appear in the message display. In this
case, press the Enter key and the operation panel will
return to the initial mode settings.
If you want the reception to begin right away, this step
is not necessary. Proceed to step 14.
12
Press the Enter key.
13 Use the keypad to enter the desired time for the
reception to begin.
If you want to reset the displayed time to "00:00",
simply press the Stop/Clear key.
14 Press the Enter key. The reception operation will begin automatically.
If a time for the reception to begin was designated, the reception operation will begin when the
appointed time is reached.
5-12
TX Time:14:57
Enter TX Time