Functions Auxiliary - Epson PLQ-20 Reference Manual

Functions auxiliary

This section describes functions executed by turning on the
printer while holding one or more buttons. These functions are
shown in the following table and explained in detail after the
table.
Switch
F2*
F1/Eject & F2
F1/Eject & Offline
Offline
Open the cover & F1/Eject
F2**
F2***
F2****
* To enter this mode, press the F1/Eject and F2 button while the F1/Eject,
Offline, and F2 lights are flashing.
** To enter this mode, press the F1/Eject button while the F1/Eject, Offline, and
F2 lights are flashing.
*** To enter this mode, press the Offline button while the F1/Eject, Offline, and
F2 lights are flashing.
**** To enter this mode, press the F2 button while the F1/Eject, Offline, and F2
lights are flashing.
Self-test
Prints the self-test. See "Printing a Self-Test" on page 102 for more
information.
Default setting
Starts the default setting mode. See "Changing default settings"
on page 94 for more information.
Function
Self-test
Default setting
Compress printing mode
Data dump
Paper removing
Bidirectional adjustment
Top-of-form adjustment
Printing start position adjustment
Chapter 5 Control Panel 77