Functions Auxiliary - Epson PLQ-30 User Manual

Functions auxiliary

This section describes functions executed by turning on the printer while holding one or more
buttons. These functions are shown in the following table and explained in detail after the table.
Switch
*1
F2
F1/Eject & F2
F1/Eject & Offline
Offline
Open the cover & F1/Eject
*2
F2
*3
F2 & Offline
*4
F2 & Offline
*1
To enter this mode, press the F1/Eject and F2 button while the F1/Eject, Offline, and F2 lights are flashing.
*2
To enter this mode, press the F1/Eject button while the F1/Eject, Offline, and F2 lights are flashing.
*3
To enter this mode, press the F1/Eject button while the Offline light is flashing.
*4
To enter this mode, press the F2 button while the Offline light is flashing.
Self-test
Prints the self-test. See "Printing a Self Test" on page 83 for more information.
Default setting
Starts the default setting mode. See "Changing default settings" on page 68 for more information.
Compress printing mode
Starts the compress printing mode. See "Compress Printing Mode" on page 53 for more
information.
Data dump
Starts the data dump mode, in which all input data is printed as hexadecimal numbers and
corresponding characters. See "Printing a Hex Dump" on page 84 for more information.
Function
Self-test
Default setting
Compress printing mode
Data dump
Paper removing
Bidirectional adjustment
Top-of-form adjustment
Printing start position adjustment
PLQ-30/PLQ-30M User's Guide
Control Panel 52