Epson PLQ-20 Reference Manual page 97

24-pin dot matrix printer
Hide thumbs Also See for PLQ-20:
Table of Contents

Advertisement

4. When the Ready light turns on, insert a sheet of A4 paper into
the front slot. The printer prints the guide to adjust the
bidirectional alignment and the first set of alignment patterns.
5. As described in the instructions, compare the alignment
patterns and select the pattern with the best alignment. You
can select the alignment pattern by pressing the F1/Eject
button (for the next pattern) and the F2 button (for the
previous pattern). The F1/Eject, Offline and F2 lights show
the pattern which is selected at that time. Each time you press
the F1/Eject or F2 button, the printer makes a short beep.
6. Set the pattern by pressing the Offline button. The printer
prints the next set of alignment patterns.
7. After you select the best pattern in the final set of alignment
patterns and set it by pressing the Offline button, turn off the
printer. The setting does not change even if the printer is
turned off.
Chapter 5 Control Panel
97

Advertisement

Table of Contents
loading

This manual is also suitable for:

Plq-20m

Table of Contents