Loading Roll Paper - Epson PLQ-20 Reference Manual

24-pin dot matrix printer
Hide thumbs Also See for PLQ-20:
Table of Contents

Advertisement

2. Position the roll paper holder underneath the printer as
shown below. Fit the two positioning pegs on the bottom of
the printer into the two holes in the base plate.
c

Loading roll paper

Follow these steps to load a roll of paper after you install the roll
paper holder:
1. Make sure the printer is turned off.
2. Cut the leading edge of the roll paper straight across.
Caution:
The roll paper holder is not fastened to the printer; only the
printer's weight and the two positioning pegs hold it in place.
If you pick up the printer, be careful not to drop the roll paper
holder.
Chapter 7 Options and Consumables
140

Advertisement

Table of Contents
loading

This manual is also suitable for:

Plq-20m

Table of Contents