Changing Default Settings - Epson PLQ-20 Reference Manual

Changing default settings

The following table shows the basic function of each button in the
default setting mode.
Button
F1/Eject
Offline
F2
Follow these steps to enter the default-setting mode and change
the printer's default settings:
Note:
❏ Prepare an A4 size sheet of paper before entering the default setting
mode.
❏ You need to load a new sheet of paper each time the printer ejects a
printed sheet from the front slot.
❏ Always close the printer cover before printing. The printer does not
print when the printer cover is open.
1. Turn off the printer.
c
2. Turn on the printer while holding the F1/Eject and F2 buttons
on the control panel.
Basic function
Selects the next menu parameter.
Selects the previous menu parameter.
Changes the value in the selected menu.
Caution:
Whenever you turn off the printer, wait at least five seconds
before turning it back on; otherwise you may damage the
printer.
Chapter 5 Control Panel 94