Placing A Telephone Call; Receiving A Telephone Call; Accessing The Call Waiting Service - Uniden FP104 Operating Manual

PLACING A TELEPHONE CALL

1. Lift the handset from the Base.
2. Press the keypad buttons to dial the phone number you want.
3. After you have completed the phone call, place the Handset back

RECEIVING A TELEPHONE CALL

When the phone rings, pickup the Handset
from the Base and begin the conversation.
(
Ring indicator
the call is picked up.)

ACCESSING THE CALL WAITING SERVICE

(Australian Model only)
1. While talking, you hear the call
2. Press
3. To switch back to original call, press
Note: The flash + 2 call waiting procedure toggles call between the
ACCESSING THE CALL WAITING SERVICE
(New Zealand Model only)
1. While talking you hear the Call Waiting beep signal.
2. Press flash button. This feature sends a 600mS timed "hook-flash"
Note: You must subscribe to Telecoms Call Waiting Service before you can
9
on the Base.
continuously flashes until
waiting signal (series of beep tones).
then
flash 2
incoming and the original call (vice versa). The
flash + 1 procedure will drop the current call connection and pick
up the incoming call or the call on hold.
on telephone line for accessing services such as Call Waiting, etc.
use this feature.
to switch call and put the current call on hold.
flash
memory
pause flash
then .
1
mute
redial