Placing A Telephone Call; Redial; Receiving A Telephone Call; Accessing Call Waiting (New Zealand Model Only) - Uniden FP100 Operating Manual

Feature phone series telephone with 3 x one touch speed dial memories

Table of Contents

USING YOUR FP100

PLACING A TELEPHONE CALL

1. Remove the Handset from the Base.

2. Press the keypad buttons to dial the phone number you want.

3. After you have completed the phone call, place the Handset back on the Base.

If you want to redial the last number dialed, simply pick up the Handset

then press the

the last number dialed.

When the phone rings, pickup the Handset from the Base and begin the

conversation.

ACCESSING THE CALL WAITING SERVICE USING THE FLASH BUTTON

(New Zealand Model only)

While talking you hear the Call Waiting beep signal.

Press the

button. This feature sends a 600mS timed "hook-flash" on the

telephone line for accessing services such as Call Waiting, etc.

NOTE: You must subscribe to Telecoms Call Waiting Service before you can use this feature.

ACCESSING CALL WAITING SERVICE USING THE FLASH BUTTON

(Australian Model only)

1. While talking, you hear the call waiting signal (series of beep tones).

2. Press

button then

3. To switch back to original call, press

NOTE: The

and the original call (vice versa). The

current call connection and pick up the incoming call or the call on hold.

button. The telephone will automatically redial

to switch call and put the current call on hold.

call waiting procedure toggles call between the incoming

button then

procedure will drop the

Table of Contents