Led Indicators; Placing A Telephone Call; Redial; Receiving A Telephone Call - Uniden FP102 Operating Manual

Hands free speaker phone with pre-programmed 5+15 memory

Table of Contents

USING YOUR FP102

LED indicators

1. call LED indicator: Red light which flashes when the

telephone is ringing.

This is sometimes referred to as a 'Visual Ringing Indicator'.

2. status LED indicator:

a. Solid red light when 'In Use'.

b. Solid green light when in Speakerphone mode.

c. Flashing green light when on 'Hold'.

1. Remove the Handset from the Base, or press the

2. Press the keypad buttons to dial the phone number you want.

3. After you have completed the phone call, place the Handset back on the Base.

If you want to redial the last number dialed, simply pick up the Handset or

press the

will automatically redial the last number dialled.

When the phone rings, pickup the Handset from the Base, or press the

button and begin the conversation.

ACCESSING THE CALL WAITING SERVICE USING THE

CALL WAITING BUTTON (New Zealand Model only)

While talking you hear the Call Waiting beep signal.

Press the

on the telephone line for accessing services such as Call Waiting, etc.

NOTE: You must subscribe to Telecoms Call Waiting Service before you can use this feature.

button, then press the

button. This feature sends a 600mS timed "hook-flash"

button.

button. The telephone

Table of Contents