Table of Contents
Advertisement
M
To program One-Touch Memories (1-5).
Note:
M
During the memory storage procedure you may enter a 4 second
delay between numbers (for accessing a switchboard, or long
distance service) by pressing the pause button at the point in the
number sequence you wish to pause. The pause button counts as
one digit. Pressing pause more than once will increase the length
of the pause between numbers.
M
When you have programmed a number into the speed dial memory,
write the name of the person on the Memory Storage Card
(supplied).
M
1. Pick up Handset.
2. Press desired one touch speed dial button.
11
Storing One-Touch Memories
1. Pickup the Handset.
2. Press
memory
3. Enter telephone number that you
want to program.
4. Press the
memory
5. Press the desired speed dial button
(1-5).
Make sure to complete the storing of numbers in memory within
8 secs. Otherwise, the unit exits programming state (you will hear
a series of beep tones). In this case, repeat steps 1-5.
Pause
Memory Storage Card
Dialing Numbers from Memory
button.
button.
memory
pause
flash
mute
redial
Advertisement
Table of Contents
