Using.Hold,.Conference.and.Transfer
Placing.a.Call.on.Hold
)
During a call, press [int'com/hold] to place the caller on hold. The line key (the LINE1 or LINE2 soft key) to
be placed on hold will flash. The call will be put on hold.
Note: If you leave a caller on hold for more than ten seconds, the display screen will read, HOLD.
2)
To return to the party on hold, press [ /flash] or [ ].on a handset or press [ ].on the base. Or press the
corresponding line key (the LINE1 or LINE2 soft key). The phone will return to the holding party.
Note:
•
You can only place a caller on hold for 5 minutes. Once 5 minutes has passed, that party's line will be dis-
connected and the phone will return to standby.
•
While a call is on hold, Caller ID and Call Waiting cannot be received.
Conferencing
If you have more than one cordless handset, up to seven people can participate in a conference call. A seven-way
conference call consists of outside Line + outside Line 2 + base + four handsets. Only four handsets can partici-
pate in any conference call. You can easily join a call already in progress.
)
Press corresponding line key (the LINE1 or LINE2 soft key) to join the conference call.
2)
To hang up, return the cordless handset to the cradle or press [ ] on the handset or press [ ].on the base.
The other party will still be connected to the call.
Conferencing.with.one.outside.line
To hold a conference call with one outside line, simply have the handsets or base join the call.
Conferencing.with.2.outside.lines
Follow the steps below to allow both outside lines to participate in a conference call:
During a call, press [int'com/hold] on the handset or base to put the first caller on hold.
)
2)
Press the line key (LINE1 or LINE2 soft key) for a free line to make or answer a second call.
47