Default Settings - Epson ActionPrinter L-750 User Manual

Default Settings

The table below shows the default conditions that become valid
when the printer is initialized.
Item
Top of form position
Left and right margins
Line spacing
Vertical tab position
Horizontal tab positions
VFU channel
Font selection
Character pitch
Justification
Special printing effects
User-defined character set
Graphic mode assignment
In addition, when the printer is initialized by turning on the power
or by an INIT signal, the data buffer is cleared of all text.
5-12
Technical Specifications
Current paper position
Cancelled
1/6-inch line spacing
Cleared
Every eight characters
Channel 0
Hardware: reset to current DIP switch setting.
Software: reset to the current control panel setting.
Reset to current DIP switch setting.
Left justification
Cancelled
Hardware: cleared
Software: deselected only
ESC K = ESC * 0, ESC L = ESC * 1,
ESC Y = ESC * 2, ESC Z = ESC * 3
Reset to:
I