Reloading During Printing - Epson ActionPrinter L-750 User Manual

Using Single Sheets
To eject the paper, set the printer off line (by pressing the
button) and then press the
CAUTION:
knob while the printer is turned on.

Reloading during printing

When you print a document more than one page long using single
sheets of paper, there are two ways your software can allow you to
load a new sheet at the end of
If your software sends characters in
l
printer stops printing when it reaches the bottom of the paper.
When this happens, the page ejects and the
off automatically.
If your software handles printing page by page, it probably
l
stops sending characters at the end of a page and prompts you
to insert more paper. In this case, the
on. If it does, the first thing you should do is press the
button once to take the printer off line.
In either case, once the
that has just been printed and load a new sheet as before.
Press the
ON LINE
Paper Handling
2-6
FORM FEED
Never advance the paper using the paper feed
a
printed page:
ON LINE
button to start printing the next page.
button.
a
continuous stream, the
ON LINE
light may remain
ON LINE
light is off, remove the sheet
ON LINE
light goes
ON LINE