Testing the Printer
Now that your printer is fully assembled, you can use the built-in
self test function to see that the printer is working correctly even
though it is not connected to a computer. Be sure to perform this
test to check that your printer is operating properly.
Before running the self test, you need to connect your printer to an
electrical outlet and load
Plugging in the printer
Follow these steps to plug in the printer:
1.
Be sure the printer is turned off.
2. Plug the power cable into a properly grounded electrical outlet.
Loading a sheet of paper
Next, you need to load a sheet of paper wider than
a
sheet of paper.
Setting Up the Printer
14
(364
inches
mm).
1-17