Epson FX-1050 User Manual page 57

International character set
Selecting an international character set provides you with the characters
used in other languages. To obtain the desired international character set,
set switches l-6, l-7, and l-8 according to the DIP switch table on page
3-7. The following table shows the characters that differ in each
international character set.
International character sets
0
USA
1 France
2 Germany
3
UK
4 Denmark I
5
Sweden
6
Italy
7 Spain I
8 Japan
9
Norway
10 Denmark II
11 Spain II
12 Latin America
The countries numbered 8 through 12 are available only through the
ESC R software command. See the Command Summary in Chapter 8.
Also, in IBM emulation mode (DIP switch l-4 on), a character set
containing international characters (CG character table 2) is selected
whenever any one of DIP switches l-6, l-7, or l-8 is set to off. If all three
switches are on, CG character table 1 is selected. See Appendix B.
Page length
When DIP switch 2-l is on, the page length is set to 12 inches. When
it is off, the page length is 11 inches. Other page lengths can be set with
the ESC C and ESC CO commands. See the Command Summary in
Chapter 8.
Using the Printer
35 36 64 91 92 93 94 96 123 124 125 126
3-9