Epson FX-1050 User Manual page 163

ESC M
Format:
ASCII code:
Decimal:
H e x a d e c i m a l :
Comments:
Selects characters per inch printing. This command is available in
12
both draft and NLQ.
ESC p
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
The following values can be used for n:
Mode is turned ON.
1:
0: Mode is turned OFF.
The width of proportional characters varies from character to
character. Therefore, a narrow letter like i receives less space than a
wide letter like W. The proportional widths are given in the character
tables, which appear in Appendix B. This command overrides
condensed. This command is available for draft, NLQ, and user-
defined characters.
Command Summary
ESC M
27 77
4 D
1 B
ESC
27 112
n
1B 70
(The ASCII codes 0 and
characters "0" and "1" can be used.)
Turn Proportional Mode On/Off
n
n
Select 12 cpi
or the ASCII
1
8-25