Epson FX-1050 User Manual page 160

Horizontal tabbing
HT
Format:
ASCII code: HT
Decimal:
Hexadecimal: 09
Comments:
Advances the print position to the next horizontal tab setting. The
default settings are at intervals of eight characters in the default
character size, and tab positions are not affected by subsequent changes
in character size.
ESC D
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
This command allows setting of up to 32 horizontal tabs, which are
entered as nl, n2, n3, etc. (from
value less than the previous one terminating the command. ESC D 0
clears all tabs. The settings on power up or after an ESC @ command
are every eight characters. The tab settings do not change if the
character size is changed. For proportional printing the size of
characters determines the tab positions.
8-22
9
ESC D
27 68
n1
1B
1
nl n2 ...
n2 ...
44
nl n2 ...
to 255) with the 0 character or any
Tab Horizontally
Set Horizontal Tabs
0
0
00
cpi
10
Command Summary