Epson FX-1050 User Manual page 181

ESC 2
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Executes the line spacing stored in memory by ESC A. If no ESC A
command has been sent, ESC 2 sets the line spacing to l/6 of an inch.
(The 2 is the character two and not ASCII code 2.)
ESC J
Format:
ASCII code:
Decimal :
Hexadecimal:
Comments:
Advances the paper by one line at a spacing of n/216 of an inch. The
value of n must be from 0 to 255. This command produces an
immediate line feed but does not affect subsequent line spacing. It does
not produce a carriage return unless DIP switch l-3 is OFF.
ESC 4
Format:
ASCII code:
Decimal :
Hexadecimal:
Comments:
Sets the current position as top of form.
Command Summary
ESC 2
27 50
1B 32
ESC J
27 74
1B 4A n
ESC 4
27 52
1B 34
Select Programmable Line Spacing
Perform n/216-inch Line Feed
n
n
Set Top of Form
8-43