Epson FX-1050 User Manual page 171

Character Sets
t
ESC
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
The following values can be used for n:
0: Selects italic character set.
Selects Epson Extended Graphics character set.
1:
Selects the character table used by ASCII codes
Selecting Epson Extended Graphics does not disable italic printing.
Italic printing can still be selected by ESC 4. Duplicates and overrides
the function of DIP switch l-3. Note that the value of n must equal
00 hex or hex; the characters "0" and
01
Appendix B for the character tables.
ESC 4
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Causes characters from the italic character set to be printed.
This command is valid even if the Epson Extended Graphics character
set has been selected by ESC t or the DIP switch
graphics cannot be italicized. This command is available in both draft
and NLQ.
Command Summary
ESC t
27 116
1B 74
ESC 4
27 52
1B 34
n
n
n
128
cannot be used. See
"1"
l-3,
Select Character Table
through 255.
Select Italic Mode
but character
8-33