Load Fail-Safe Defaults - Gigabyte GA-8I915P Dual Graphic User Manual

+0.3V Set DIMM OverVoltage Control to +0.3V.
Incorrect using it may cause your system broken. For power End-User use only!
PCI-E OverVoltage Control
Normal Set PCI-E OverVoltage Control to Normal. (Default value)
+0.1V Set PCI-E OverVoltage Control to +0.1V.
+0.2V Set PCI-E OverVoltage Control to +0.2V.
+0.3V Set PCI-E OverVoltage Control to +0.3V.
FSB OverVoltage Control
Normal Set FSB OverVoltage Control to Normal. (Default value)
+0.1V Set FSB OverVoltage Control to +0.1V.
+0.2V Set FSB OverVoltage Control to +0.2V.
+0.3V Set FSB OverVoltage Control to +0.3V.
CPU Voltage Control
Supports adjustable CPU Vcore from 0.8375V to 1.6000V. (Default value: Normal)
Warning: CPU may be damaged or reduce CPU life-cycle when CPU is over-voltage.
Normal CPU Vcore
Display your CPU Vcore Voltage.
2-8

Load Fail-Safe Defaults

Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
MB Intelligent Tweaker(M.I.T.)
ESC: Quit
F8: Dual BIOS/Q-Flash
Fail-Safe defaults contain the most appropriate values of the system parameters that allow minimum system
performance.
GA-8I915P Dual Graphic Motherboard
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Load Fail-Safe Defaults (Y/N)? N
Load Fail-Safe Defaults
- 48 -
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
: Select Item
F10: Save & Exit Setup