Starting The Computer By Password - Toshiba Satellite Pro 4300 User Manual

Slide the battery latch into place to secure the battery pack.
6.

Starting the computer by password

If you registered a password as supervisor or user, you must enter it to
start the computer. If you forget your password, use the password service
diskette. For more information about how to set a password and make a
password service diskette, refer to the Password security section in
Chapter 7,
To start up the computer with the password, follow these steps:
Turn on the computer as described in Chapter 3,
1.
the following message appears:
At this point, the hotkeys Fn + F1 to F5 do not work. They will function
after you enter the password.
Enter the password.
2.
Press Enter. The computer displays the message below while it starts up.
3.
If you have set a password and the computer boots by the alarm Power
On function and Resume is on, the computer will start with the instant
security function enabled. The password = message is not displayed;
however, you must enter the password to use the computer.
User's Manual
Securing the battery cover
Setup and Password
Password =
Valid password entered, system is now
starting up.
Security.
Power and Power-Up Modes 6-11
Getting Started, and