Hotkeys; Tsetup; Panel Power Off; System Auto Off - Toshiba Satellite Pro 4300 User Manual

Hotkeys

You can use hotkeys Fn + F3 to set the power-up modes. See Chapter 5,
The Keyboard, for details.

TSETUP

You can use the MS-DOS-based utility TSETUP to set two power-up
modes: Resume and Boot. See Chapter 7,
for details.
The Resume mode is called Suspend/Resume in Windows 95 and
Standby in Windows 98. The functions are essentially the same.

Panel power off

You can set up your computer so that power turns on automatically when
you open the display panel and turns off when you close it.
Refer to Special Features, in Chapter 1, Introduction, for an explanation of
how to enable this convenient feature.
If you use the Suspend or Standby button in the Windows Shut Down
menu to turn off the computer, do not close the panel until the suspend
function is completed. If you close the panel before the suspend function is
completed, Resume will not work.

System auto off

This feature turns the system off automatically if it is not used for a
set duration.
Refer to Special Features, in Chapter 1, Introduction, for an explanation of
how to set the duration.

Auto Power On

This feature lets you set a time for the system to turn on automatically.
Refer to Special Features, in Chapter 1, Introduction, for an explanation of
how to set the power on timing.
User's Manual
Setup and Password
Power and Power-Up Modes 6-13
Security,