Connecting the AC adaptor
To supply AC power to the computer, connect the AC adaptor as
shown below.
Disconnecting the Card Station IV
To disconnect the Card Station IV, follow the steps below.
Shut down the computer.
1.
Make sure the computer lock is pushed back to enable disconnection
2.
of the computer from the Card Station IV.
Press on the eject lever release button on the front of the computer
3.
and pull the eject lever back to disconnect the computer.
Lift off the computer.
4.
Under Windows 95, an information screen will appear the first time you
click Eject PC from the Start menu or the first time you operate the
computer lock. Click OK to acknowledge the message and proceed. The
screen does not appear if you are using Windows 98.
8-14 Optional Devices
Connecting the AC adaptor
Disconnecting from the Card Station IV
User's Manual