Connecting the spacer to the Card Station III
This section describes connection of the spacer to the Card Station III.
Make sure the engaging pins on the Card Station III are down (pull the
1.
release lever forward).
Seat the spacer between the guide rails on the Card Station III.
2.
Hold the Card Station III and spacer together on each side and slide
3.
the spacer forward with your thumbs.
Remove the rubber cover from the computer's Docking Interface port,
4.
and set the computer lock on the bottom of the spacer to the unlock
position.
Make sure the engaging pins are down (pull the release lever forward).
5.
8-22 Optional Devices
Connecting the spacer
User's Manual