User Password - Toshiba Satellite Pro 4300 User Manual

a.) If character strings match, the password is registered and the
6.
display changes to:
If you do not want to provide user access to the TSETUP program,
press N to return to the DOS prompt.
To provide user access to TSETUP, press Y and continue with the
procedures in the section Enabling TSETUP in this chapter.
b.) If the character strings do not match, the following message
appears:
Press Y to return to step 3. Press N to return to the DOS prompt.

User password

To enter a user password, execute TSETUP, then:
Go to the Password item and press the Space or BkSp key to
1.
display the following prompt:
Enter a password of up to 10 characters. The character string you
2.
enter is displayed as a string of asterisks. For example, if you enter a
password consisting of four characters, the display is shown as:
If you press Enter before entering the password, Not registered will
appear on the display.
Press Enter. The following message appears, allowing you to verify
3.
the password.
If character strings match, the password is registered and the display
4.
changes to:
If they do not match, the following message appears along with a beep
indicating you must repeat from step 2.
User's Manual
SUPERVISOR PASSWORD = Registered
USER PASSWORD MODE = Unable to run SETUP
Do you want to change the setting <Y/N>?
Password verify error!
Do you want to retry <Y/N>?
Password =
Password = ****
Verify Password =
Registered
Entry Error!!
Setup and Password Security 7-17