Connecting To The Card Station Iii - Toshiba Satellite Pro 4300 User Manual

Connecting to the Card Station III

Connection of the Card Station III requires a spacer. You can connect the
spacer by itself to either the Card Station III or to the computer. You can
also either prevent or enable disconnection of the computer from the
spacer while the spacer remains connected to the Card Station III.
This section describes two ways of connecting to the Card Station III:
Computer with spacer
1.
Spacer alone
2.
Connecting the computer with spacer to the Card Station III
This section describes connection of the spacer to the computer, then
connection of the computer with spacer to the Card Station III. The unlock
status lets you remove the computer from the spacer without removing the
spacer from the Card Station III.
Remove the rubber cover from the computer's Docking Interface port,
1.
and set the computer lock on the bottom of the spacer to the unlock
position.
Seat the computer between the spacer guide rails and push the
2.
computer forward to secure it on the spacer.
Connect the spacer with computer to the Card Station III as described
3.
in the next section.
8-20 Optional Devices
Connecting the computer to the spacer
User's Manual