Supervisor Password; Starting The Computer By Password - Toshiba SATELLITE R850 User Manual

Supervisor Password

If you set a Supervisor Password, some functions might be restricted when
a user logs on with the User Password. To set a Supervisor Password,
execute the file TOSPU.EXE. The file is located at:
C:\Program Files\Toshiba\PasswordUtility\TOSPU.exe
This utility lets you do the following:

Starting the computer by password

If you have already registered a password, there are several ways to start
the computer:
Downloaded from LpManual.com Manuals
User's Manual
Change (button)
Click this button to change a registered password. Before you can
change a password, you must first enter the current password
correctly. Please use BIOS Setup to change or delete the HDD
Passwords or to set the HDD Master Password.
Owner String (text box)
You can use this box to associate text with the password. After you
enter text, click Apply or OK. When the computer is started, this text
will be displayed together with the prompt asking you to enter a
password.
If you forget your HDD User Password, TOSHIBA will NOT be able to
assist you, and your HDD will be rendered COMPLETELY and
PERMANENTLY INOPERABLE. TOSHIBA will NOT be held
responsible for any loss of any data, any loss of use or access to your
HDD, or for any other losses to you or any other person or
organization that result from the loss of access to your HDD. If you
can't accept this risk, don't register the HDD User Password.
When saving the HDD User Password shut down or restart the
computer. If the computer is not shut down or restarted, the saved
data may not be correctly reflected. For more information on shutting
down or restarting the computer, refer to
Chapter 1.
Set, delete or change the Supervisor Password.
Specify restrictions for general users.
Swipe your fingerprint on the sensor if you have already registered the
fingerprint with the Fingerprint utility and enabled Fingerprint System
Boot Authentication. If you would not like to swipe your finger or
cannot authenticate the fingerprint for some reasons, push the BACK
SPACE key to skip the fingerprint authentication screen.
Enter the password manually.
R850/R840/R830
Turning on the power in
4-16