Power-Up Modes - Toshiba Satellite Pro 4300 User Manual

User manual
Hide thumbs Also See for Satellite Pro 4300:
Table of Contents

Advertisement

If you enter the password incorrectly, a buzzer sounds.
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.
The following steps describe how to use a service password diskette to start
the computer if you've forgotten the supervisor's or user's password. If you
did not make a password service diskette, contact your dealer.
Insert the password service diskette in the drive. See the Password
1.
security section in Chapter 7,
on how to create a password service diskette.
If the computer is in Resume mode, the password service diskette will not
work when you turn on the power. In this case, press the reset button.
When you press Enter, the password will be deleted and the following
2.
message appears.
Press Y to run the TSETUP program and set a new password.
Press N to restart the computer.
The password service diskette must be inserted in drive A, otherwise the
display will return to Password = . If you have inserted the diskette in
drive A and the message still appears, the password service diskette is
faulty. In this case, contact your dealer.
If the boot priority is set for the hard disk, press the reset button and hold
down F key to boot from the diskette drive.

Power-up modes

The computer has three power-up modes:

Hibernation (saves data in memory to the hard disk)

Resume (retains data in memory)

Boot (does not save data in memory)
Refer also to the sections Turning off the power in Chapter 3,
Started, and to Special Features in Chapter 1, Introduction.
6-12 Power and Power-Up Modes
Set Password Again?
Setup and Password
(Y/N)
Security, for details
Getting
User's Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Satellite pro 4200 series

Table of Contents