Gateway 9715 User Manual page 136

Installing and removing the ROMB (RAID on Motherboard) activation key and dedicated
8
Engage the retention tabs on the back of the battery with the matching slots in the
side of the chassis, then push the battery to the left to latch it into place.
9
Reinstall the memory board or memory board air baffle into slot D by following the
instructions in "Installing and removing memory boards" on page
10
Replace the processor air baffle by following the instructions in
installing the processor air baffle" on page 67.
11
Follow the instructions in
To remove the smart battery:
1
Follow the instructions in
2
Follow the instructions in
3
Remove the processor air baffle by following the instructions in
installing the processor air baffle" on page
4
Remove the memory board or memory board air baffle from slot D by following the
instructions in "Installing and removing memory boards" on page
5
Disconnect the battery cable from the system board.
"Closing the server case" on page
"Preventing static electricity discharge" on page
"Opening the server case" on page
67.
www.gateway.com
85.
"Removing and
72.
65.
66.
"Removing and
85.
131