Garmin Databases - Garmin G1000 Cockpit Reference Manual

3) Press the ENT Key to start the database update. A prompt similar to the
following is displayed:
4) After the update completes, the PFD starts in normal mode.
5) Turn the G1000 System OFF and remove the SD card.
6) Repeat steps 1 through 4 for other PFD and the MFD. The MFD and PFD
databases are now updated. Remove the SD card when finished.
7) Verify that the correct update cycle is loaded during startup of the MFD.

Garmin Databases

The following G1000 databases are stored on Supplemental Data Cards provided
by Garmin:
• Extended Basemap
• Terrain
• Airport terrain
• Obstacle
• SafeTaxi
• FliteCharts
A Supplemental Data Card should be inserted into the bottom card slot of the PFDs
and the MFD and not removed except for updating the card. If one of the Supplemen-
tal Data Cards contains the ChartView database, or the FliteCharts database, this card
must be inserted into the bottom card slot on the MFD.
Since these databases are not stored internally in the MFD or PFDs, a Supplemental
Data Card containing identical database versions must be kept in each display unit.
190-00600-01 Rev. C Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
Database Update Confirmation
Appendix
87