Removing From Carton; Loose Parts - Craftsman 247.88355 Operator's Manual

NOTE:Referencesto rightor bft side of the snowthrowerare
determined from behindthe unit in the operatingposition(standing
directlybehindthesnow thrower,facing the handlepanel),
Removing From Carton
1, Cut the cornersof the cartonand lay the sidesflat on the ground,
Removeand discardall packinginserts,
2, Movethe snowthrowerout of the carton,
3, Makecertainthe carton has beencompletelyemptiedbefore
discardingit,
Loose Parts
Tworeplacementaugershearpinsare includedwith this manual,
Referto Augerson page 15 for moreinformationregardingshearpin
replacement,
Setting up Snow Thrower
1, Observethe lowerrear area of thesnow throwerto be sure both
cablesare alignedwith rollerguidesbeforepivotingthe handle
upward,
2, Securethe handleby tighteningthe plasticwing knoblocatedon
boththe left and rightsides of the handb, Removeand discardany
rubberbands,if present,They are for packagingpurposesonly,
8, Positionthechute assemblyoverthe base,
4, Closethe flangekeepersto securethe chute assernblyto the chute
base,The flangekeeperswill click intoplacewhenproperlysecure,
NOTE:If the flangekeeperswill not easilyclick into place,usethe
palmof your handto applyswift,firm pressureto the backof each,
6