COZY HEDV254A Installation And Operating Instructions Manual page 15

HEVE-5
VENT ENCLOSURE KIT
INSTALLATION INSTRUCTIONS
STEP 1) Position end of Part No. 41610 enclosure body to
heater trim kit where pipes exit trim kit, centering
pipes inside body and attach to wall. Wall anchors,
not provided, may be required. Collector box may
be behind HEVE-5 Kit.
STEP 2) Cut to fit enclosure panel 1" beyond end of vent
run. Insert Part No. 41620 End Cap and attach
using three #8 screws provided.
SPE (IAL INSTR[ K;TIONS
STEP 3) If more than one HEVE-5 Kit is used, attach Part
No. 72604 Trim Kit where ends meet.
STEP 4) If making a 90. mJm, measure 1" beyond outside
mm and cut offenclosure panel. Notch panel on
surl:ace of direction mm is being made to allow
pipes to pass through into next HEVE-5 Kit.
Attach second panel to wal! and attach Part No.
72604 Trim Kit where two bodies meet. Install
end cap Part No. 41620.
HEEL-1
90*-ELBOW KIT
Contains 1 only P/N 72613 90,*Elbow 2"
Page 15