Selecting A Non-Translation Text String [Insert Non-Translation Brackets] - Fujitsu ATLAS V14 User Manual

Introduction
Selecting a Non-Translation Text String [Insert
Non-Translation Brackets]
You can select an original text string you want to leave untranslated in the translated
text. The following example shows the selected words in a pair of double brackets ([[ ]]).
Ex.1:
We call him the big boss.
We call him the ［［big boss］］ .
Ex.2:
中国では ト イ レ ッ ト ペーパーを手紙 と 書 く 。
中国では ト イ レ ッ ト ペーパーを ［［手紙］］ と 書 く 。
1
Select the string of original text you wish to leave as it is in the translated
text.
2
Select [Insert Non-Translation Brackets] from the [Edit] menu.
To delete the control brackets, select [Delete Mark] from the [Assistance] menu and select
[Control Brackets, Non-Translation Brackets] or [All].
The brackets used as [Control Brackets] and [Non-translation Brackets] can be changed.
1. Select [Translation Environment] from the [Translation] menu.
2. Select the [English to Japanese] or [Japanese to English] tab, and click the [Translation Style]
button.
3. Use the [Brackets] tab to set [Control Brackets, Non-Translation Brackets].Set [Control
Brackets] become single brackets, while set [Non-translation Brackets] become double
brackets.
Set brackets become valid when the next symbol is entered. However, existing symbols are
not changed and the original brackets become invalid when re-translated.
14
Original text
Original text
Translated text
私た ちは、 彼を大き いボス と 呼びます。
私た ちは、 彼を big boss と 呼びます。
Translated text
Toilet paper is written the letter in China.
Toilet paper is written 手紙 in China.