Specific Safety Rules For The Unit - Craftsman 320.23465 Operator's Manual

Use only identical replacement parts when servicing a tool. Follow
the instructions in the Maintenance section of this manual. Use of
unauthorized parts or failure to follow maintenance instructions may create a
risk of electric shock or injury.
SPECIFIC SAFETY RULES FOR MULTI-TOOL
• Never use your Multi-Tool to perform sanding or separating operations in wet
conditions.
• Always wear eye protection.
• Always wear ear protection during extended periods of operation.
• Always wear a dust mask if the operation is dusty.
• Wear protective gloves when changing application accessories. Application
accessories become hot after prolonged usage.
• Always inspect for and remove all nails, screws, staples, etc. before sanding.
• Always check walls and ceilings to avoid hidden power cables and pipes. A
metal detector (available separately) is very helpful for this purpose.
• Whenever possible, use clamping devices or other suitable means to secure
the workpiece to a firm surface.
• When working with the machine, always hold it firmly with both hands and
provide for a secure stance. The power tool is guided more securely with
both hands.
Keep your workplace clean. Blends of materials are particularly dangerous.
Dust from light alloys can burn or explode.
Avoid unintentionally switching on the tool. Ensure that the on/off switch is in
the OFF position before connecting the tool to the power source.
Do not scrape wet or dampened materials (e.g. wallpaper) or on moist
surfaces. Penetration of water into the machine increases the risk of an
electric shock.
Do not treat the surface to be worked with solvent-containing fluids.
Materials being heated by the scraping can cause toxic vapors to develop.
Exercise extreme caution when handling the scraper accessory. The
accessory is very sharp; danger of injury.
Use only the original Craftsman accessories and the other accessories
(Fein _ Multi-Master accessories) available for this Multi-Tool, no others. FEIN
_Multi-Master is registered trademarks of FEIN Power Tools Inc.
Only use application accessories in good condition. Do not use them if they
are torn or worn.
23465 ManuaLRevised_lO 0705 Page 8