1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Power Tool
  5. NEXTEC 320.35078
  6. Operator's manual

Craftsman NEXTEC 320.35078 Operator's Manual

2.5 amp multi-tool kit
Hide thumbs
Table of Contents

Advertisement

Quick Links

2.5 AMP MULTI-TOOL
Model No. 320.35078
_WARNING:
To reduce the risk of injury,
read and understand the Operator's
manual
before using this product.
• WARRANTY
• SAFETY
• ASSEMBLY
• OPERATION
• MAINTENANCE
• ESPANOL
Sears Brands Management
Corporation,
Hoffrnan
Estates,
IL 60179
U.S.A.
www,
craftsman,com

Advertisement

Table of Contents
loading

Related Manuals for Craftsman NEXTEC 320.35078

Summary of Contents for Craftsman NEXTEC 320.35078

  • Page 1 • WARRANTY • SAFETY • ASSEMBLY _WARNING: To reduce the risk of injury, • OPERATION read and understand the Operator's manual • MAINTENANCE before using this product. • ESPANOL Sears Brands Management Corporation, Hoffrnan Estates, IL 60179 U.S.A. www, craftsman,com...

  • Page 2: Warranty

    For warranty coverage details to obtain free replacement, visit the web site: www.craftsman.com This warranty does not cover the sandpaper, rasps or blades, which are expendable parts that can wear out from normal use within the warranty period. This warranty...
  • Page 3 ,_, DANGER: People with electronic devices, such as pacemakers, should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference failure of the pacemaker. _,WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction...

  • Page 4: Safety Alert Symbol

    The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention...
  • Page 5 SAVE THESE iNSTRUCTiONS Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely. SYMBOL NAME D ESIGNATION/EXPLANATION Volts Voltage Amperes...

  • Page 6: Power Tool Safety Warnings

    GENERAL POWER TOOL SAFETY WARNINGS ,_, WARNING: Read and understand all instructions. Failure to follow all instructions in this Operator's Manual may result in electric shock, fire, and/or serious personal injury. Save all warnings and instructions for future reference. The term "power tool" in all warnings listed below refers to corded power tools or battery-operated...

  • Page 7: Personal Safety

    PERSONAL SAFETY • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
  • Page 8 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories, tool bits, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.

  • Page 9: Know Your Multi=Tool

    KNOW YOUR MULTI=TOOL (Fig. 1} Fig. 1 On/Off Switch Live Tool Quick-Release Lever Indicator Light Drive Shaft Ribs _[ange Bolt Variable-Speed Dial PRODUCT SEPCIFICATIONS Input 2.5 Amps Rating 120V, 60Hz, AC Oscillation Rate 11000-19000/min Oscillation Angle _+1.4degrees Tool Weight 3.5 Ibs. WARNING: The safe use of this product requires an understanding of the...
  • Page 10 QUICK-RELEASE LEVER The quick-release lever allows for tool-less exchange of application tools. VARIABLE=SPEED ADJUSTMENT DiAL The variable-speed dial is located on the back of your tool for selecting appropriate speed. LED WORKLIGHT The LED worklight is located in the front of the tool. This feature provides extra light for increased visibility.
  • Page 11 SELECTING THE APPLiCATiON TOOL APPLiCATiON TOOL MATERIALS Bare or Painted Wood, Sanding Plate and Plaster, other surfaces, Sandpaper depending on sandpaper grit Wood, Plastic, Drywall, Non- Circular Saw Blade Ferrous Metals, Thin Sheet Metal and other materials Grout, Plaster, Porous Carbide Circular Blade Concrete...

  • Page 12: On/Off Switch

    ON/OFF SWITCH (Fig. 2) Fig. 2 Connect the power cord of your multi-tool to a standard household power outlet. To turn the tool ON, push the on/off switch forward. To turn the tool OFF, pull the on/off switch backward. VARIABLE=SPEED DIAL (Fig.
  • Page 13 LiVE TOOL iNDiCATOR LIGHT :ig. 5 Live tool indicator light (Fig. 5} The live tool indicator light is a green light located on the back of the tool. This light is always on when the multi-tool is plugged into a power source. ATTACHING THE APPLiCATiON TOOLS (Figs.
  • Page 14 Align the grooves on the Fig. 7 application tool with the four raised ribs on the drive shaft. Put the application tool onto the drive shaft (Figs. 7 and 8). With your gloved hand holding the application tool, insert and depress the flange bolt until you hear a click indicating that the application...
  • Page 15 Always apply to the compatible sanding plate (supplied with your multi-tool). The sandpaper kit is also compatible with the Bosch PMF180E, GOP 10.8V Li and Craftsman Nextec Multi-tool. TO mNSTALL THE SANDING PLATE Disconnect the multi-tool from the power source. Push the quick-release Bever fully open with your palm to Boosen the flange bolt (Fig.
  • Page 16 Remove the tool from the surface periodically to permit the sanding sheet to cool down. A sanding sheet that has been used for metal should not be used for other materials. • Use only Craftsman sanding accessories. Page 16 35078 Manual_Revised_12 0615...

  • Page 17: Saw Blade

    The circular saw blade is also compatible with the Fein Multi=Master tool and Craftsman Nextec Multi=tool. TO mNSTALL THE CIRCULAR SAW BLADE CAUTION: Wear protective gloves. WARNING: Use sharp, undamaged saw blades only.
  • Page 18 • Carbide-tipped, circular grout disc. Designed for grout, plaster, masonry or porous concrete removal around the wall tiles. The carbide circular blade is compatible with Fein Multi-Master Tool and Craftsman Nextec Multi-tool. Page 18 35078 ManuaLRevised_12 06:$5...
  • Page 19 TO iNSTALL THE CARBIDE CIRCULAR BLADE WARNING: Use sharp, undamaged saw blades only. Deformed, blunt saw blades or saw blades that are otherwise damaged can break. WARNING: When sawing light building materials, observe the precautions and the recommendations of the material suppliers. WARNING: Plunge cuts may only be applied to soft materials, such as...
  • Page 20 The scraper blade is also compatible with the Fein Multi-Master Tool and Craftsman Nextec Multi-tool. TO iNSTALL THE SCRAPER BLADE ,_L CAUTION: Wear protective gloves. WARNING: Check that the application tool is correctly attached.

  • Page 21: Using The Scraper

    Align the grooves on the Groove scraper blade with the four raised ribs on the drive shaft; put the scraper onto the drive shaft (Fig. 23). With your gloved hand holding the blade, insert and depress the flange bolt until you hear a click indicating that the scraper blade is secured.
  • Page 22 Designed for grout, masonry, thinset, wood and removal hardened adhesives on the wall tiles. The triangular rasp is also compatible with the Fein Multi- Master Tool and Craftsman Nextec Multi-tool. Fig. 27 Groove TO INSTALL THE CARBIDE TRIANGULAR RASP CAUTION:...
  • Page 23 Can plunge and saw with a slight pendulum action in wood. The flush cut blade is also compatible with the rein Multi-Master Tool and Craftsman Nextec Multi-tool. 0 ° 45 ° 90 ° TO iNSTALL THE FLUSH CUT BLADE CAUTION:...
  • Page 24 With your gloved hand holding the blade, insert and depress the flange bolt until you hear a click indicating that the flush-cut blade is secured. Push the quick-release lever with your palm to lock the driver shaft (Fig. 10). WARNING: Do not attach the flush cut blade, facing backwards, operation in this position...
  • Page 25 NOTICE: The multi-tool can be used with the Craftsman accessories below (sold separately): MODEL DESCRIPTION 67650 Carbide Circular Blade 67651 Circular Saw Blade 67652 Scraper Blade 67653 Flush Cut Saw Blade 67654 Carbide Triangular Rasp 67655 Sandpaper Kit (60, 120, 180 grit)

  • Page 26: Maintenance

    _!_,WARNING: Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc. _,.WARNING: Do not at any time allow brake fluids, gasoline, petroleum- based products, penetrating...
  • Page 27 2.5A VARIABLE=SPEED MULTI-TOOL MODEL NUMBER 320.35078 The Model Number will be found on the Nameplate. Always mention the Model Number when ordering parts for this tool. To order parts, call 1-800-469-4663. ÷ 35078 Manual_Revised_12-0615 Page 27...
  • Page 28 2.5A VARIABLE=SPEED MULTI-TOOL MODEL NUMBER 320.35078 The Model Number will be found on the Nameplate. Always mention the Model Number when ordering parts for this tool. To order parts, call 1-800-469-4663. 4890939000 PCB Assembly 4930038000 Receptacle 4930008000 Sleeve 4860006000 Inner Wire 4920154000 Shrinkable Tube...
  • Page 29 3321487000 Right Housing 5610024000 Tapping Screw 3120234000 Cord Anchorage 3126800000 Right Indicator Cover 3126796000 Switch Actuator 3551798000 Bush 3402598000 Lever 5670317000 2800176000 Brush Holder 4960273000 Carbon Brush 4930036000 Receptacle 3126797000 LED Cover 5700040000 Oil Impreging Bearing 2823250000 Quick Clamp Assembly 3551760000 Lock Pole 3520628000...
  • Page 30 Page 30 35078 ManuaLRevised_12 06i5...
  • Page 31 35078 Manual_Revised_12-0615 Page 31...

Table of Contents