Product View And Parts Identification - Craftsman 320.23465 Operator's Manual

ID]_.'_o_[[e_]
KNOW YOUR MULTI-TOOL (Fig. 2)
Fig. 2
LED worklight
On/Off switch
Live tool indicator" LED light
cord
Vents
Vacuum adapter
Drive shaft
;}iiii[ii!iiiii[_
Flange bolt
Variable speed dial
Before attempting to use this Multi-Tool, familiarize yourself with all of its
operating features and safety requirements.
This Multi-Tool has the following features:
• A multifunction drive shaft system that allows the tool to be used for dry
sanding of small surfaces, corners and edges, for scraping, for sawing thin
steel sheet, wood and plastic by attaching different application tools supplied.
• 2.0 Amps, 11000 to 19000 oscillation per minute variable speed motor.
• Variable speed is controlled by the seed dail located on the back of the tool.
• LED worklight illuminates working area.
• "Live tool indicator" LED light shines green when the Multi-Tool is plugged
into a power source.
• The vacuum adapter can improve dust extraction, when it is installed on the tool
and connected with a dust-extraction system or a suitable vacuum cleaner.
PRODUCT SPECIFICATIONS
Input 2.0Amps
Oscillation Rate 11000 to 19000/Min
Oscillation Angle _+1.4 degrees
Rating 120 volts, 60Hz AC
Weight 2.71 Ibs (1.23 kg)
23465 ManuaLRevised_10 0705 Page 11