Using The Printer Control Panel; Understanding The Colors Of The Indicator And Sleep Button Lights - Lexmark MS810 User Manual

Using MS810de
When using optional trays:
• Always use a caster base when the printer is configured with a 2100‑sheet tray.
•
The 2100‑sheet tray must always be at the bottom of a configuration.
•
A maximum of four optional trays may be configured with the printer.
•
The optional 250‑ and 550‑sheet trays may be installed in any order.

Using the printer control panel

Use the
1 Display
2 Home button
3 Sleep button
4 Keypad
5 Stop or Cancel button Stop all printer activity.
6 Indicator light
7 USB port

Understanding the colors of the indicator and Sleep button lights

The colors of the indicator and Sleep button lights on the printer control panel signify a certain printer status or condition.
1
7
To
•
View the printer status.
•
Set up and operate the printer.
Go to the home screen.
Enable Sleep mode or Hibernate mode.
Do the following to wake the printer from Sleep Mode:
• Press any hard button.
• Pull out Tray 1 or load paper in the multipurpose feeder.
•
Open a door or cover.
•
Send a print job from the computer.
• Perform a power‑on reset with the main power switch.
• Attach a device to the USB port on the printer.
Enter numbers, letters, or symbols.
Check the status of the printer.
Connect a flash drive to the printer.
Note: Only the front USB port supports flash drives.
2
3
4
5
6
88