Additional Printer Setup; Installing Internal Options; Available Internal Options - Lexmark MS810 User Manual

Additional printer setup

Additional printer setup

Installing internal options

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and then unplug the power
cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then
turn them off as well, and unplug any cables going into the printer.

Available internal options

•
Memory card
–
DDR3 DIMM
–
Flash memory
•
Fonts
• Firmware cards
–
Forms barcode
–
PRESCRIBE
–
IPDS
–
Printcryption
• Printer hard disk
TM
•
Lexmark Internal Solutions Ports (ISP)
–
Parallel 1284-B interface
TM
–
MarkNet N8350 802.11 b/g/n wireless printer server
–
MarkNet N8130 10/100 fiber interface
–
RS-232-C serial interface
13