How To Adjust A Setting - Envision EN9110 User Manual

Envision peripherals 19" lcd monitor user's manual en9110

Hide thumbs Also See for EN9110:

Table of Contents

HOW TO ADJUST A SETTING

1. Press the MENU-button to activate the OSD window. See figure 5.

2. Press

3. Press the MENU-button again to activate the highlighted function.

4. Press

Note:

is used to adjust the function down &

function up. This is due to the orientation of the adjustment level bar.

5. When the OSD window is active, it shows the input signal timing. The "H"

stands for the horizontal frequency and "V" for the vertical frequency.

6. To exit and save, select the exit function, or leave the monitor alone for 10

seconds. If you want to adjust another function press MENU again and

repeat steps 2-4.

to select the desired function. See figure 5.

to adjust the selected function.

Figure 5

The OSD Message

EN9110

is used to adjust the

Table of Contents