Related Manuals for Envision 31MY02
Summary of Contents for Envision 31MY02
- Page 1 EN-780e EN-780e 17 inch Flat CRT Color Monitor User’s Manual by Envision Peripherals, Inc. www.ENVISIONmonitor.com Before operating your monitor, please read this manual thoroughly. EN-780e_31MY02 31MY02...
-
Page 2: Fcc Statement
To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously high voltage is present inside the monitor. Do not open the cabinet. Refer servicing to qualified personnel only. EN-780e ® Partner, Envision ® guidelines for energy 31MY02... - Page 3 • To ensure satisfactory operation, use the monitor only with UL-listed computers which have appropriately configured receptacles marked between 100 - 240 V AC, Min. 3.5A. • The wall socket should be installed near the equipment and should be easily accessible. EN-780e 31MY02...
-
Page 4: General Notes
• EPA ENERGY STAR Package Contents The box that your monitor was shipped in should have included the following items: 1. EN-780e Color Monitor 2. Power Cord 3. Quick Start Guide 4. Booklet (containing Warranty and Safety information) EN-780e ® 31MY02... -
Page 5: Before You Operate The Monitor
Before You Operate the Monitor EN-780e Installing & Removing the Base EN-780e 31MY02... - Page 6 100/120V AC or 220/240V AC voltage areas (no user adjustment is required). If the AC outlet is not grounded (with three holes), install the proper grounding adapter (not supplied). EN-780e 31MY02...
-
Page 7: Connecting The Wires Using An Optional Power Cord (Not Supplied)
2. Connect the power cord into your monitor's power input socket. 3. Plug the other end of the power cord into the power output socket on your PC. EN-780e 31MY02... -
Page 8: Front Panel Buttons
Power: Press this button to turn the monitor on or off. The power indicator will light up. On-screen Display (OSD): Press the MENU button to open the OSD window and adjust settings on your monitor. (See next page.) EN-780e 31MY02... -
Page 9: Adjusting The Osd Settings
10 seconds. If you want to adjust any other function, repeat steps 2-4. Note: When the OSD window is open, the input signal timing settings appear at the top. H: stands for horizontal frequency and V: stands for vertical frequency. EN-780e 31MY02... -
Page 10: Plug & Play Ddc1/2B Feature
2. Click on SERVICES & SUPPORT to open the drivers web page. 3. Follow the directions on the web page to download and install the driver on your computer. Or go to www.ENVISIONmonitor.com/support/ drivers.asp to directly access the driver web page. EN-780e 31MY02... -
Page 11: Technical Support (Faq)
• Adjust the User Color setting in the OSD window. (white does not look white) EN-780e Technical Support (FAQ) Possible Solution and to the monitor. (ENVISION monitor drivers are available at: www.ENVISIONmonitor.com) electrical interference. LOCK key and observing whether the CAPS LOCK light turns ON or OFF. EN-780e 31MY02... -
Page 12: Specifications
H/V TTL Sync. H/V Sync. Positive/Negative H-Frequency 30 kHz - 95 kHz V-Frequency 50 Hz -160 Hz Analog: 0.7 Vpp, 75 OHM, Positive Universal AC 100 - 240 V 50/60 Hz 120 Watts UL, CSA, FDA, FCC, TÜV/GS, MPRII 31MY02... - Page 13 Specifications (continued) Environmental Operating Temp: Considerations 32° to 104°F (0° to 40°C) ambient Operating Humidity: 10% to 90% Signal Cable Attached Mini D-sub 15 Male Optimal Viewing Mode: 1024 x 768 @ 85 Hz EN-780e Appendix EN-780e 31MY02...
-
Page 14: Factory Preset Timing Table
1024 × 768 68.7 kHz 1280 × 960 85.9 kHz 1280 × 1024 91.1 kHz 1600 × 1200 93.8 kHz EN-780e Vertical Frequency 70 Hz 60 Hz 85 Hz 85 Hz 85 Hz 85 Hz 85 Hz 75 Hz 31MY02... -
Page 15: Connector Pin Assignment
Connector Pin Assignment Pin Number EN-780e Appendix Description Pin Number Green Blue Ground Ground R-Ground G-Ground B-Ground EN-780e Description Ground Monitor Ground DDC-Serial Data H-Sync V-Sync DDC-Serial Clock 31MY02... -
Page 16: Limited 3-Year Warranty
This is a warranty statement for Envision color monitors including those sold within North America as specified. Envision Peripherals, Inc. (EPI) warrants this product to be free from defects in material and workmanship for a period of three (3) years after the original date of consumer purchase. - Page 17 EPI is not responsible for any costs associated with the transportation of products across international borders. This includes the international borders of the countries within this warranty statements. © 2002 Envision Peripherals, Inc. EN-780e 31MY02...