Chapter 3 Embroidering Procedures
BES-940BC
62
Switches at Machine Heads
Power switch
Stop switch
Stop switch
Stops embroidering operation. When embroidering is stopped,
Refer to "Resetting Machine Stop" (
Power switch
Starts embroidering. Holding down this button executes embroidering at a low speed.
When resuming embroidering after stop switch, release machine stop before
pressing this button. Refer to "Resetting Machine Stop" (
Switches on Tension Plate
BES-940BC • BES-1240BC
BES-1240BC
Between head No.1 and No.2
Between head No.3 and No.4
Between head No.2 and No.3
page 193) to stop flashing.
THREAD SENSOR lamp
HEAD switch
MENDING lamp
MENDING switch
STEP BACK/FWD switch
Stop switch
Power switch
flashes.
page 193) for details.