Settings Before Turning On The Machine; Displaying The Tool Bar - Brother BES-1240BC Instruction Manual
Nine needle four head electronic embroidery machine; twelve needle four head electronic embroidery machine
Hide thumbs
Also See for BES-1240BC:
- Parts manual (143 pages) ,
- Maintenance manual (14 pages) ,
- Referencia de máquina (14 pages)
Table of Contents
Advertisement
Chapter 6 Embroidering
Settings before Turning On the Machine
Describes settings available before the machine is turned on.
(*) Dealer engineers carries out version upgrading and resetting of the interface
Shows/hides the tool bar. The tool bar contains icons with the same functions as
the menu.
1.
132
The following items can be set.
• Displaying the tool bar
• Displaying the status bar
• Upgrading the version of interface board (*)
• Resetting the interface board (*)
• Communication port
• Language
board.
Displaying the Tool Bar
There are two kinds of tool bars as follows:
Main
Main menu items are displayed on this tool bar.
Step Back
This tool bar appears during step-back/forward.
Select [Tool Bar] from View menu and put the check mark.
Click here again to remove the check mark. Then the tool bar disappears.
BES-940BC • BES-1240BC
Hide quick links:
Advertisement
Table of Contents
