Brother BES-1240BC Instruction Manual page 114

Chapter 5 Editing Embroidery Data
1.
2.
3.
112
The number for repetition is 1 to 100 for both vertical (Row) and horizontal (Column)
directions.
The unit for repetition can be set in inches. To use the inch unit, set the length to
[inch] on the [Configuration] of Tool menu of the machine controller. (
The pattern connection can be set in "Direction" as follows:
From top left,alternating directions
From bottom left,alternating directions
Select [Repeat] from Edit menu or click
Specify the number, interval and direction of repetition.
Repeat count in the
longitudinal direction
Repeat count in the
lateral direction
All patterns created in repetition are grouped as a single pattern.
Longitudinal distance (Unit: 0.1 mm or 0.01")
Lateral distance (Unit: 0.1 mm or 0.01")
Click [OK].
BES-940BC • BES-1240BC
From top left,left to right direction
From bottom left,left to right direction
The value can be directly entered.
Click here to increase/decrease the value.
page 150)
.
Select the direction of repetition.
Select the reference position for
spacing.