Feature 'B' Programming - Autopage C3-RS-665 Installation Manual

All Confirmation
4
chirps on
Lock/Arm &
Unlock/Disarm
5 +
Confirmation
Chirps
H7/13 White wire=
6 +
Dome Light Output
With Dome light
7 +
turns on after
ignition off (45
*
If passive arming is selected, the auto rearm feature will be active
Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds.
Three long chirps & Three parking light flashes will confirm exit.
FEATURE "B" PROGRAMMING:
1 Turn the Ignition 'switch 'ON/OFF' 3 TIMES and stay in OFF position.
2 Push the Valet switch 5 times (holding in on the 5th push) until two
chirps with a long chirp is heard then release the valet switch. You are
now in the Alarm feature 'B' programming mode.
Press and release the transmitter button corresponding to the feature
you want to program.
(See next page for table)
second door
by-pass)
Siren
Confirmation
chirp on only
Lock/Arm
Confirmation
Chirp Only
H7/13 White
wire= Horn
Output
With Dome light
turns ON after
ignition on & off
(45 second door
by-pass)
20
Horn
Confirmation
chirp on only
H7/13 White
wire= Factory
Security Rearm
Signal
Without this
feature
All
Confirmation
chirps off
H7/13 White
wire= 3rd
Channel
Momentary
(5 chirps)
3rd channel
Latched